Whetstones & Knife Care

Accessories Information

– Plastic blade guard with felt lining
– 16cm length
– Most suited to 12-15cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

Accessories Information

– Plastic blade guard with felt lining
– 27cm length
– Most suited to 24cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

*Please ensure the correct sized saya is chosen before purchasing, a list of knives that fit this saya is linked below, Chefs Edge is not responsible if the wrong sized saya is selected*

Accessories Information

– Plastic blade guard with felt lining
– 24cm length
– Most suited to 21cm chef knives

Please note, carbon steel blades, when not oiled, can rust when stored in blade guards lined with felt. Please ensure to completely dry and oil your carbon steel knives before using the blade guard, and not to store them in felt guards for long periods of time.  

*Logo may vary from item pictured*

*Please ensure the correct sized saya is chosen before purchasing, a list of knives that fit this saya is linked below, Chefs Edge is not responsible if the wrong sized saya is selected*

*Please ensure the correct sized saya is chosen before purchasing, a list of knives that fit this saya is linked below, Chefs Edge is not responsible if the wrong sized saya is selected*

*Please ensure the correct sized saya is chosen before purchasing, a list of knives that fit this saya is linked below, Chefs Edge is not responsible if the wrong sized saya is selected*

Accessories Information

• Guide Clip
  
• Clip to the spine of your knife to maintain a consistent sharpening angle

Accessories Information

Heavy duty, sturdy rubber-based whetstone holder. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length

– Weight: 577g

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #320 Coarse (Only for stubborn steel or small repairs)

Weight:

Dimensions:  

Accessories Information

One of the best whetstone holders money can buy. Heavy duty, sturdy, and of the highest quality. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 150mm to 250mm in length

Accessories Information

• 500 Grit Nagura Stone
• Cleaning and flattening Yoshoku Whetstone

Accessories Information

The GlassStone series of sharpening stones uses a revolutionary design to provide great usability within a thin package formed from a combination of glass layers. The conventional image is that sharpening stones are large and heavy, but GlassStones are not only thin and light, but also strong, as layers of tempered glass are stuck together. GlassStones therefore have strong resistance to cracking or sudden breakage caused by external shocks such as being dropped.

Shapton stones do not need to be soaked except the very first time after purchase. We do recommend that on first use, you pre-soak the stone in water for five to six minutes to secure even smoother sharpening. Shapton stones do not need a Nagura Stone, and lapping with a Nagura Stone will leave the surface rough and ragged.

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #120 Very Coarse (Only for larger repairs)

Weight:

Dimensions:  

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)

Weight:

Dimensions:  

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 4
• Mesh: 3000
  
• No Case Included

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 25
• Mesh: 500
  

When you're trying to achieve an ultra-precise edge, the slightest wobble or vibration can result in distortions in the blade. The GS Holder is heavy enough to use as a sharpening base, and its form gives it stability far higher than that of the GS Field Holder.

Dimensions: 259 x 86 x 56mm

Weight: approx. 1,960g